Skip to content

added autoconf to apt install requirements (RPi) #326

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
sfinktah wants to merge 1 commit into
base: master
Choose a base branch
from
Open

added autoconf to apt install requirements (RPi) #326

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
6 changes: 3 additions & 3 deletions README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -96,17 +96,17 @@ To be able to communicate with the firmware without root priviledges, we created

## Build patches for bcm43430a1 on the RPI3/Zero W or bcm434355c0 on the RPI3+/RPI4 using Raspbian (recommended)
**Note:** We currently support Kernel Version 4.4 (depricated), 4.9, 4.14 and 4.19. Raspbian contains firmware version 7.45.154 for the bcm43455c0. We also support the newer firmware release 7.45.189 from Cypress. Please, try which works best for you.
* Make sure the following commands are executed as root: `sudo su`
* Make sure the following commands are executed as root: `sudo -s`
* Upgrade your Raspbian installation: `apt-get update && apt-get upgrade`
* Install the kernel headers to build the driver and some dependencies: `sudo apt install raspberrypi-kernel-headers git libgmp3-dev gawk qpdf bison flex make`
* Install the kernel headers to build the driver and some dependencies: `sudo apt install raspberrypi-kernel-headers git libgmp3-dev gawk qpdf bison flex make autoconf`
* Clone our repository: `git clone https://github.com/seemoo-lab/nexmon.git`
* Go into the root directory of our repository: `cd nexmon`
* Check if `/usr/lib/arm-linux-gnueabihf/libisl.so.10` exists, if not, compile it from source:
* `cd buildtools/isl-0.10`, `./configure`, `make`, `make install`, `ln -s /usr/local/lib/libisl.so /usr/lib/arm-linux-gnueabihf/libisl.so.10`
* Check if `/usr/lib/arm-linux-gnueabihf/libmpfr.so.4` exists, if not, compile it from source:
* `cd buildtools/mpfr-3.1.4`, `./configure`, `make`, `make install`, `ln -s /usr/local/lib/libmpfr.so /usr/lib/arm-linux-gnueabihf/libmpfr.so.4`
* Then you can setup the build environment for compiling firmware patches
* Setup the build environment: `source setup_env.sh`
* Setup the build environment: `sudo -s`, `source setup_env.sh`
* Compile some build tools and extract the ucode and flashpatches from the original firmware files: `make`
* Go to the *patches* folder for the bcm43430a1/bcm43455c0 chipset: `cd patches/bcm43430a1/7_45_41_46/nexmon/` / `patches/bcm43455c0/<7_45_154 or 7_45_189>/nexmon/`
* Compile a patched firmware: `make`
Expand Down