Add heltec rcc6

boards/heltec_rcc6.json

@@ -0,0 +1,29 @@
+{
+  "build": {
+    "arduino": {
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "f_cpu": "160000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32c6",
+    "variant": "heltec_rcc6"
+  },
+  "connectivity": ["bluetooth", "wifi", "lora"],
+  "debug": {
+    "openocd_target": "esp32c6.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "heltec_rcc6",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/",
+  "vendor": "heltec"
+}

src/helpers/ESP32Board.h

@@ -34,8 +34,10 @@ class ESP32Board : public mesh::MainBoard {
   #ifdef PIN_VBAT_READ
     // battery read support
     pinMode(PIN_VBAT_READ, INPUT);
+  #if ESP_ARDUINO_VERSION_MAJOR < 3
     adcAttachPin(PIN_VBAT_READ);
   #endif
+  #endif
 
   #ifdef P_LORA_TX_LED
     pinMode(P_LORA_TX_LED, OUTPUT);

src/helpers/ui/NV3001BDisplay.cpp

@@ -2,6 +2,14 @@
 #include <Arduino.h>
 #include <string.h>
 
+#if NV3001B_USE_FAST_GPIO
+  #if !defined(CONFIG_IDF_TARGET_ESP32C6)
+    #error "NV3001B_USE_FAST_GPIO is only supported on ESP32-C6"
+  #endif
+  #include <hal/gpio_ll.h>
+  #include <soc/gpio_struct.h>
+#endif
+
 #ifndef SPI_FREQUENCY
   #define SPI_FREQUENCY 8000000
 #endif
@@ -202,26 +210,71 @@ static void writeOptionalPin(int pin, int level) {
   digitalWrite(pin, level);
 }
 
-void NV3001BDisplay::writeCommand(uint8_t cmd) {
+void NV3001BDisplay::beginTransport() {
+#if NV3001B_USE_SOFTWARE_SPI
+  pinMode(PIN_TFT_SCL, OUTPUT);
+  pinMode(PIN_TFT_SDA, OUTPUT);
+  digitalWrite(PIN_TFT_SCL, LOW);
+  digitalWrite(PIN_TFT_SDA, LOW);
+#else
+  spi.begin(PIN_TFT_SCL, PIN_TFT_MISO, PIN_TFT_SDA, PIN_TFT_CS);
+#endif
+}
+
+void NV3001BDisplay::beginTransfer() {
+#if NV3001B_USE_SOFTWARE_SPI
+  digitalWrite(PIN_TFT_SCL, LOW);
+#else
   spi.beginTransaction(SPISettings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0));
+#endif
+}
+
+void NV3001BDisplay::transferByte(uint8_t value) {
+#if NV3001B_USE_SOFTWARE_SPI
+  for (uint8_t mask = 0x80; mask != 0; mask >>= 1) {
+  #if NV3001B_USE_FAST_GPIO
+    gpio_ll_set_level(&GPIO, PIN_TFT_SDA, (value & mask) ? HIGH : LOW);
+    gpio_ll_set_level(&GPIO, PIN_TFT_SCL, HIGH);
+    gpio_ll_set_level(&GPIO, PIN_TFT_SCL, LOW);
+  #else
+    digitalWrite(PIN_TFT_SDA, (value & mask) ? HIGH : LOW);
+    digitalWrite(PIN_TFT_SCL, HIGH);
+    digitalWrite(PIN_TFT_SCL, LOW);
+  #endif
+  }
+#else
+  spi.transfer(value);
+#endif
+}
+
+void NV3001BDisplay::endTransfer() {
+#if NV3001B_USE_SOFTWARE_SPI
+  digitalWrite(PIN_TFT_SCL, LOW);
+#else
+  spi.endTransaction();
+#endif
+}
+
+void NV3001BDisplay::writeCommand(uint8_t cmd) {
+  beginTransfer();
   digitalWrite(PIN_TFT_DC, LOW);
   digitalWrite(PIN_TFT_CS, LOW);
-  spi.transfer(cmd);
+  transferByte(cmd);
   digitalWrite(PIN_TFT_CS, HIGH);
-  spi.endTransaction();
+  endTransfer();
 }
 
 void NV3001BDisplay::writeBytes(const uint8_t* data, size_t len) {
   if (!data || len == 0) return;
 
-  spi.beginTransaction(SPISettings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0));
+  beginTransfer();
   digitalWrite(PIN_TFT_DC, HIGH);
   digitalWrite(PIN_TFT_CS, LOW);
   for (size_t i = 0; i < len; i++) {
-    spi.transfer(data[i]);
+    transferByte(data[i]);
   }
   digitalWrite(PIN_TFT_CS, HIGH);
-  spi.endTransaction();
+  endTransfer();
 }
 
 void NV3001BDisplay::writeCommandData(uint8_t cmd, const uint8_t* data, size_t len) {
@@ -253,15 +306,15 @@ void NV3001BDisplay::writeColor(uint16_t rgb, uint32_t count) {
   uint8_t hi = rgb >> 8;
   uint8_t lo = rgb & 0xff;
 
-  spi.beginTransaction(SPISettings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0));
+  beginTransfer();
   digitalWrite(PIN_TFT_DC, HIGH);
   digitalWrite(PIN_TFT_CS, LOW);
   while (count--) {
-    spi.transfer(hi);
-    spi.transfer(lo);
+    transferByte(hi);
+    transferByte(lo);
   }
   digitalWrite(PIN_TFT_CS, HIGH);
-  spi.endTransaction();
+  endTransfer();
 }
 
 void NV3001BDisplay::initPanel() {
@@ -427,7 +480,7 @@ bool NV3001BDisplay::begin() {
   digitalWrite(PIN_TFT_DC, HIGH);
   delay(20);
 
-  spi.begin(PIN_TFT_SCL, PIN_TFT_MISO, PIN_TFT_SDA, PIN_TFT_CS);
+  beginTransport();
   if (PIN_TFT_RST >= 0) {
     pinMode(PIN_TFT_RST, OUTPUT);
     digitalWrite(PIN_TFT_RST, HIGH);

src/helpers/ui/NV3001BDisplay.h

@@ -1,9 +1,24 @@
 #pragma once
 
 #include "DisplayDriver.h"
-#include <SPI.h>
 #include <helpers/RefCountedDigitalPin.h>
 
+#ifndef NV3001B_USE_SOFTWARE_SPI
+  #define NV3001B_USE_SOFTWARE_SPI 0
+#endif
+
+#ifndef NV3001B_USE_FAST_GPIO
+  #define NV3001B_USE_FAST_GPIO 0
+#endif
+
+#if NV3001B_USE_FAST_GPIO && !NV3001B_USE_SOFTWARE_SPI
+  #error "NV3001B_USE_FAST_GPIO requires NV3001B_USE_SOFTWARE_SPI"
+#endif
+
+#if !NV3001B_USE_SOFTWARE_SPI
+  #include <SPI.h>
+#endif
+
 #ifndef NV3001B_LOGICAL_WIDTH
   #define NV3001B_LOGICAL_WIDTH 128
 #endif
@@ -20,19 +35,25 @@
   #define NV3001B_PANEL_HEIGHT 220
 #endif
 
-#ifndef NV3001B_SPI_HOST
+#if !NV3001B_USE_SOFTWARE_SPI && !defined(NV3001B_SPI_HOST)
   #define NV3001B_SPI_HOST HSPI
 #endif
 
 class NV3001BDisplay : public DisplayDriver {
+#if !NV3001B_USE_SOFTWARE_SPI
   SPIClass spi;
+#endif
   RefCountedDigitalPin* periph_power;
   bool is_on = false;
   uint16_t color = 0xffff;
   uint8_t text_size = 1;
   int cursor_x = 0;
   int cursor_y = 0;
 
+  void beginTransport();
+  void beginTransfer();
+  void transferByte(uint8_t value);
+  void endTransfer();
   void writeCommand(uint8_t cmd);
   void writeBytes(const uint8_t* data, size_t len);
   void writeCommandData(uint8_t cmd, const uint8_t* data, size_t len);
@@ -44,7 +65,13 @@ class NV3001BDisplay : public DisplayDriver {
 
 public:
   NV3001BDisplay(RefCountedDigitalPin* power = nullptr) :
-      DisplayDriver(NV3001B_LOGICAL_WIDTH, NV3001B_LOGICAL_HEIGHT), spi(NV3001B_SPI_HOST), periph_power(power) { }
+      DisplayDriver(NV3001B_LOGICAL_WIDTH, NV3001B_LOGICAL_HEIGHT)
+#if !NV3001B_USE_SOFTWARE_SPI
+      ,
+      spi(NV3001B_SPI_HOST)
+#endif
+      ,
+      periph_power(power) { }
 
   bool begin();
   static const char* driverName() { return "NV3001B"; }

variants/heltec_rcc6/heltec_rcc6.cpp

@@ -0,0 +1,37 @@
+#include "heltec_rcc6.h"
+
+void HeltecRCC6Board::begin() {
+  ESP32Board::begin();
+
+  pinMode(PIN_USER_BTN, INPUT_PULLUP);
+
+  pinMode(PIN_ADC_CTRL, OUTPUT);
+  digitalWrite(PIN_ADC_CTRL, LOW);
+
+  if (esp_reset_reason() == ESP_RST_DEEPSLEEP) {
+    gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+    if (esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_GPIO &&
+        gpio_get_level((gpio_num_t)P_LORA_DIO_1) == HIGH) {
+      startup_reason = BD_STARTUP_RX_PACKET;
+    }
+  }
+}
+
+void HeltecRCC6Board::powerOff() {
+  enterDeepSleep(0);
+}
+
+uint16_t HeltecRCC6Board::getBattMilliVolts() {
+  analogReadResolution(12);
+  analogSetAttenuation(ADC_2_5db);
+  digitalWrite(PIN_ADC_CTRL, ADC_CTRL_ENABLED);
+  delay(10);
+  uint32_t raw = 0;
+  for (int i = 0; i < 8; i++) {
+    raw += analogReadMilliVolts(PIN_VBAT_READ);
+  }
+  raw = raw / 8;
+  digitalWrite(PIN_ADC_CTRL, !ADC_CTRL_ENABLED);
+
+  return (adcMultiplier * raw);
+}

variants/heltec_rcc6/heltec_rcc6.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#include <Arduino.h>
+#include <helpers/ESP32Board.h>
+
+#ifndef ADC_MULTIPLIER
+#define ADC_MULTIPLIER 4.95f
+#endif
+
+class HeltecRCC6Board : public ESP32Board {
+  float adcMultiplier = ADC_MULTIPLIER;
+
+public:
+  void begin();
+  void powerOff() override;
+  uint16_t getBattMilliVolts() override;
+
+  bool setAdcMultiplier(float multiplier) override {
+    adcMultiplier = multiplier == 0.0f ? ADC_MULTIPLIER : multiplier;
+    return true;
+  }
+
+  float getAdcMultiplier() const override { return adcMultiplier; }
+  const char *getManufacturerName() const override { return "heltec_rcc6"; }
+};

variants/heltec_rcc6/pins_arduino.h

@@ -0,0 +1,20 @@
+#ifndef PINS_ARDUINO_H
+#define PINS_ARDUINO_H
+
+#include <stdint.h>
+
+#define USB_VID 0x303A
+#define USB_PID 0x1001
+
+static const uint8_t TX = 16;
+static const uint8_t RX = 17;
+
+static const int8_t SDA = -1;
+static const int8_t SCL = -1;
+
+static const uint8_t MISO = 20;
+static const uint8_t SCK = 21;
+static const uint8_t MOSI = 22;
+static const uint8_t SS = 23;
+
+#endif