new plugin Sentry PDU (CDU)

src/hardware/pdu/sentry/snmp/mode/components/humidity.pm

@@ -0,0 +1,107 @@
+#
+# Copyright 2026-Present Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::pdu::sentry::snmp::mode::components::humidity;
+
+use strict;
+use warnings;
+
+my %map_temp_status = (
+    0 => 'normal',
+    1 => 'notFound',
+    2 => 'reading',
+    3 => 'humidLow',
+    4 => 'humidHigh',
+    5 => 'readError',
+    6 => 'lost',
+    7 => 'noComm'
+);
+
+my $mapping = {
+    tempHumidSensorID => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.2' },
+    tempHumidSensorName => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.3' },
+    tempHumidSensorHumidValue => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.10' },
+    tempHumidSensorHumidStatus => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.9', map => \%map_temp_status },
+};
+my $oid_tempHumidSensorEntry = '.1.3.6.1.4.1.1718.3.2.5.1';
+
+sub load {
+    my ($self) = @_;
+
+    foreach (@{$self->{request}}) {
+        return if ($_->{oid} eq $oid_tempHumidSensorEntry);
+    }
+    push @{$self->{request}}, { oid => $oid_tempHumidSensorEntry };
+}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => "Checking humidities");
+    $self->{components}->{humidity} = {name => 'humidities', total => 0, skip => 0};
+    return if ($self->check_filter(section => 'humidity'));
+
+    foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_tempHumidSensorEntry}})) {
+        next if ($oid !~ /^$mapping->{tempHumidSensorHumidStatus}->{oid}\.(.*)$/);
+        my $instance = $1;
+        my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_tempHumidSensorEntry}, instance => $instance);
+
+        next if ($self->check_filter(section => 'humidity', instance => $result->{tempHumidSensorID}));
+
+        if ($result->{tempHumidSensorHumidStatus} =~ /notFound/i) {
+            $self->{output}->output_add(long_msg => "skipping not present humidity sensor for '" . $result->{tempHumidSensorName}, debug => 1);
+            next;
+        }
+
+        $self->{components}->{humidity}->{total}++;
+
+        $self->{output}->output_add(long_msg => sprintf("Humidity '%s' status is '%s' [instance: %s, value: %s]",
+                                    $result->{tempHumidSensorName}, $result->{tempHumidSensorHumidStatus},
+                                    $result->{tempHumidSensorID}, $result->{tempHumidSensorHumidValue}));
+        my $exit = $self->get_severity(section => 'humidity', instance => $result->{tempHumidSensorID}, value => $result->{tempHumidSensorHumidStatus});
+        if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+            $self->{output}->output_add(severity => $exit,
+                                        short_msg => sprintf("Humidity '%s' status is %s",
+                                                             $result->{tempHumidSensorName}, $result->{tempHumidSensorHumidStatus}));
+        }
+
+        if (defined($result->{tempHumidSensorHumidValue}) && $result->{tempHumidSensorHumidValue} =~ /[0-9]/) {
+            my $value = $result->{tempHumidSensorHumidValue};
+            my ($exit2, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'humidity', instance => $result->{tempHumidSensorID}, value => $value);
+            if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) {
+                $self->{output}->output_add(severity => $exit2,
+                                            short_msg => sprintf("Humidity '%s' value is %s %%", $result->{tempHumidSensorName}, $value));
+            }
+            $self->{output}->perfdata_add(
+                label => 'humidity',
+                unit => '%',
+                nlabel => 'hardware.sensor.humidity.percentage',
+                instances => $result->{tempHumidSensorName},
+                value => $value,
+                warning => $warn,
+                critical => $crit,
+                min => 0,
+                max => 100
+            );
+        }
+    }
+}
+
+1;

src/hardware/pdu/sentry/snmp/mode/components/temperature.pm

@@ -0,0 +1,104 @@
+#
+# Copyright 2026-Present Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::pdu::sentry::snmp::mode::components::temperature;
+
+use strict;
+use warnings;
+
+my %map_temp_status = (
+    0 => 'normal',
+    1 => 'notFound',
+    2 => 'reading',
+    3 => 'tempLow',
+    4 => 'tempHigh',
+    5 => 'readError',
+    6 => 'lost',
+    7 => 'noComm'
+);
+
+my $mapping = {
+    tempHumidSensorID => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.2' },
+    tempHumidSensorName => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.3' },
+    tempHumidSensorTempValue => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.6' },
+    tempHumidSensorTempStatus => { oid => '.1.3.6.1.4.1.1718.3.2.5.1.5', map => \%map_temp_status },
+};
+my $oid_tempHumidSensorEntry = '.1.3.6.1.4.1.1718.3.2.5.1';
+
+sub load {
+    my ($self) = @_;
+
+    foreach (@{$self->{request}}) {
+        return if ($_->{oid} eq $oid_tempHumidSensorEntry);
+    }
+    push @{$self->{request}}, { oid => $oid_tempHumidSensorEntry };
+}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => "Checking temperatures");
+    $self->{components}->{temperature} = {name => 'temperatures', total => 0, skip => 0};
+    return if ($self->check_filter(section => 'temperature'));
+
+    foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_tempHumidSensorEntry}})) {
+        next if ($oid !~ /^$mapping->{tempHumidSensorTempStatus}->{oid}\.(.*)$/);
+        my $instance = $1;
+        my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_tempHumidSensorEntry}, instance => $instance);
+
+        next if ($self->check_filter(section => 'temperature', instance => $result->{tempHumidSensorID}));
+
+        if ($result->{tempHumidSensorTempStatus} =~ /notFound/i) {
+            $self->{output}->output_add(long_msg => "skipping not present temperature sensor for '" . $result->{tempHumidSensorName}, debug => 1);
+            next;
+        }
+
+        $self->{components}->{temperature}->{total}++;
+
+        $self->{output}->output_add(long_msg => sprintf("Temperature '%s' status is '%s' [instance: %s, value: %s]", 
+                                    $result->{tempHumidSensorName}, $result->{tempHumidSensorTempStatus},
+                                    $result->{tempHumidSensorID}, $result->{tempHumidSensorTempValue} / 10));
+        my $exit = $self->get_severity(section => 'temperature', instance => $result->{tempHumidSensorID}, value => $result->{tempHumidSensorTempStatus});
+        if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+            $self->{output}->output_add(severity => $exit,
+                                        short_msg => sprintf("Temperature '%s' status is %s", 
+                                                             $result->{tempHumidSensorName}, $result->{tempHumidSensorTempStatus}));
+        }
+
+        if (defined($result->{tempHumidSensorTempValue}) && $result->{tempHumidSensorTempValue} =~ /[0-9]/) {
+            my $value = $result->{tempHumidSensorTempValue} / 10;
+            my ($exit2, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'temperature', instance => $result->{tempHumidSensorID}, value => $value);
+            if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) {
+                $self->{output}->output_add(severity => $exit2,
+                                            short_msg => sprintf("Temperature '%s' value is %s C", $result->{tempHumidSensorName}, $value));
+            }
+            $self->{output}->perfdata_add(
+                label => 'temp', unit => 'C',
+                nlabel => 'hardware.sensor.temperature.celsius',
+                instances => $result->{tempHumidSensorName},
+                value => $value,
+                warning => $warn,
+                critical => $crit
+            );
+        }
+    }
+}
+
+1;