Skip to content

About

Independent native C++ GPC controller script studio for Windows, using the Interceptor Gamepad & Controller kernel filter driver. Editor, script library, IN/OUT monitor and explicit compatibility diagnostics.

Topics

Resources

Contributing

Security policy

Stars

2 stars

Watchers

0 watching

Forks

Repository files navigation

Cronus Interceptor - GPC Controller Script Studio for Windows

Open, edit, compile and run compatible Cronus .gpc source scripts on your connected Windows controllers using the Interceptor Gamepad & Controller kernel filter driver. Native C++17, an English editor, a script library, live IN/OUT values and precise source diagnostics. No Cronus device is needed for the supported controller path.

Download | Driver setup | Compatibility | Build and tests

Studio showing an offline source preview

Compatibility preview: this is an independent GPC implementation, not the official Zen compiler or firmware. It does not execute every GPC script or reproduce every Cronus hardware feature. Successful compilation alone does not prove hardware parity. Check the compatibility report and public-script test results before choosing a script.

Install and start

  1. Download the Windows x64 ZIP from Releases and extract all files. It includes CronusInterceptor.exe, example scripts and the matching Gamepad & Controller InterceptorSetup.exe (signed driver 1.0.13.0).
  2. Connect your controllers and close other capture/remapping apps. Run InterceptorSetup.exe, accept elevation and click Install / reinstall. If the combined Interceptor edition is installed, uninstall it first.
  3. If setup requests it, use Windows Restart, then reopen InterceptorSetup.exe to finish pending device associations. Follow any further restart request until setup reports that the driver is running and its API responds.
  4. Open CronusInterceptor.exe and accept elevation. It checks the driver before starting live monitoring. If it is absent or unavailable, a dialog offers Open driver setup or Continue without driver; editing and compilation remain available without physical capture.
  5. Double-click a library script or choose Open .gpc. Select 32-bit Zen or 16-bit legacy integer mode, then Compile / F7.
  6. Choose Run / F5. The script runs independently for each captured controller. Stop / Shift+F5 releases capture and restores physical passthrough.

Opening or editing a script does not execute it. A compilation error leaves an already running script unchanged. A runtime fault stops capture, reports its line/column and restores physical input. An instruction budget prevents a script with an infinite loop from holding the input path indefinitely.

Driver setup stops this app's capture/monitor and opens the verified installer beside the app. The same InterceptorSetup.exe is available separately in the release. If you download only the standalone app EXE, put setup beside it; otherwise the button opens the driver download in your browser. An altered installer or another edition is rejected by its SHA-256 hash. No driver is installed silently. After setup finishes, reopen the app; Run / F5 also checks the driver again. Remove the driver.

Editor and script library

  • New / Ctrl+N, Open / Ctrl+O, Save / Ctrl+S, undo/redo and standard clipboard shortcuts. The editor preserves plain UTF-8 .gpc source.
  • Ten included, editable examples cover face-button swaps, axis inversion, triggers, layers, timed sequences, nested combos and persistence.
  • New scripts and edited examples can be saved under %LOCALAPPDATA%\TitanCSA\CronusInterceptor\Scripts; that folder appears in the library alongside the supplied examples. The original imported file is not overwritten by a library Save As.
  • Copy copies the complete build/runtime diagnostic text.

The device menu chooses the monitor preview; the running script applies to all compatible controllers in the active capture. IN means the received physical control value; OUT means the encoded output accepted for forwarding. -- means no usable reading. This is not proof that a particular game consumed the report.

GPC execution

The compiler builds bounded bytecode; it never converts a script to native code or invokes an external executable. Controller values use GPC's integer percentages: buttons and triggers 0..100, sticks -100..100. Negative Y means up; native XInput/GIP Y coordinates are converted accordingly.

main uses a 10 ms default virtual cycle. vm_tctrl(offset) adjusts the next cycle from that base, including -9 for 1 ms. New physical reports do not run main early. Combos continue on timer wakes when the controller is motionless; wait does not block the capture worker. Actual Windows scheduling is not a hard-real-time guarantee and can differ from a physical Cronus device.

HID axes use descriptor metadata. Standard button usages use a generic layout, with a Sony layout for Sony-vendor controllers. Nonstandard HID layouts and sensor/touch/paddle features need explicit verification; their semantics cannot be deduced universally from a report descriptor.

SPVAR values are saved for the script file identity; PVAR values are shared across scripts. Storage is under your HKCU registry. Cached atomic values are used by the input worker; a separate worker batches registry writes. These are software persistence namespaces, not eight physical Cronus EEPROM slots.

Virtual LED and rumble commands are displayed in the monitor and require acknowledging a compatibility notice before execution. They do not drive physical controller LEDs/motors. Touchpad synthesis, OLED drawing, adaptive-trigger feedback, physical battery/rumble reads, console authentication, Cronus slot programming, encrypted GamePacks and GPC2 are outside this release's support. Unsupported calls produce diagnostics; they are not silently discarded.

Driver, source and intended use

The matching Interceptor-Gamepad-Controller demo driver source is available; see driver/README.md for build instructions and separate evaluation-source terms. Those terms apply to Titan-authored driver code. Third-party source licenses and existing application/SDK licenses remain applicable. Full/commercial implementation and private signing or activation material are excluded.

This project is an example of building an application with the Interceptor Gamepad & Controller SDK, inspired by GamePad Remapper. Application and SDK sources are included; Demo/evaluation driver source is documented in driver/README.md. The app is MIT licensed; driver binaries have separate terms.

The installed driver's demo allowance applies to all apps of that edition. Install the current Microsoft-signed one-hour driver (kernel 1.0.13.0); restart Windows after upgrading from an older demo clock. Expiry restores passthrough. Use Windows Restart to renew the allowance. For an unrestricted driver, DM titancsa on Discord.

Cronus and Zen are names of their respective owners. This is an independent project, not affiliated with or endorsed by Cronus/Collective Minds. It does not include their compiler, firmware, branding assets or protected scripts.

Created for legitimate customization, accessibility, development and testing. You are responsible for your use of the app, driver and SDK and for compliance with applicable law and service rules. The author does not authorize unlawful use and disclaims warranties and liability to the extent permitted by applicable law. See LICENSE; mandatory legal rights remain unaffected.

Important

Get the full driver version without demo restrictions

Discord username: titancsa

Open Discord, choose Friends > Add Friend, enter titancsa, then send a direct message. Ask for the full driver version without the demo time limit, and mention Cronus Interceptor.

The demo limit belongs to Interceptor Gamepad & Controller, the driver used by this project. Ask for pricing and the appropriate license / activation instructions; the application or wrapper source keeps its existing license.

About

Independent native C++ GPC controller script studio for Windows, using the Interceptor Gamepad & Controller kernel filter driver. Editor, script library, IN/OUT monitor and explicit compatibility diagnostics.

Topics

Resources

Contributing

Security policy

Stars

2 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages