diff --git a/source/_integrations/mitsubishi_comfort.markdown b/source/_integrations/mitsubishi_comfort.markdown
new file mode 100644
index 000000000000..22f561d4452d
--- /dev/null
+++ b/source/_integrations/mitsubishi_comfort.markdown
@@ -0,0 +1,63 @@
+---
+title: Mitsubishi Comfort
+description: Integrate Mitsubishi Electric ductless minisplit heat pump and air conditioning systems with Home Assistant.
+ha_category:
+  - Climate
+ha_release: 2026.5
+ha_iot_class: Local Polling
+ha_config_flow: true
+ha_codeowners:
+  - '@nikolairahimi'
+ha_domain: mitsubishi_comfort
+ha_platforms:
+  - climate
+ha_integration_type: hub
+ha_quality_scale: bronze
+---
+
+The **Mitsubishi Comfort** {% term integration %} connects Mitsubishi Electric ductless minisplit heat pump and air conditioning systems to Home Assistant. It communicates directly with each indoor unit over your local network for low-latency control, using the Kumo Cloud account only for initial device discovery and credential retrieval.
+
+This integration supports indoor units (full climate control) and Kumo Station outdoor units (temperature monitoring only).
+
+## Prerequisites
+
+- A [Kumo Cloud](https://app.kumocloud.com) account with your Mitsubishi devices registered
+- Devices must be connected to your local network via their Wi-Fi adapters
+- During setup you will be asked to enter the **username** and **password** for your Kumo Cloud account. The integration uses these credentials to discover your devices and retrieve the local API passwords needed for direct communication.
+
+{% include integrations/config_flow.md %}
+
+## Supported devices
+
+- **Indoor unit** (ductless, ducted)
+  - Controls: mode, temperature, fan speed, vane direction
+  - Sensors: temperature, humidity, filter status, Wi-Fi signal
+- **Kumo Station** (outdoor unit, read-only)
+  - Sensors: outdoor temperature, Wi-Fi signal
+
+## Supported functionality
+
+The **Mitsubishi Comfort** integration provides the following entities.
+
+### Climate
+
+Each indoor unit is exposed as a climate entity with the following capabilities:
+
+- **HVAC modes**: Off, Cool, Heat, Dry, Fan only, Heat/Cool (auto)
+  - Availability depends on the specific unit.
+- **Fan modes**: Super quiet, Quiet, Low, Powerful, Super powerful, Auto
+  - The number of available speeds depends on the unit.
+- **Swing modes**: Horizontal, Mid-Horizontal, Midpoint, Mid-Vertical, Vertical, Auto, Swing
+  - Availability depends on the unit.
+- **Temperature**: Single setpoint in Cool and Heat modes, separate high and low setpoints in Heat/Cool (auto) mode.
+  - Temperature ranges vary by unit and mode.
+
+## Data updates
+
+The Mitsubishi Comfort integration {% term polling polls %} the status of your devices every 60 seconds. When you send a command (such as changing the mode or adjusting the temperature), Home Assistant reflects the change straight away, without waiting for the next poll.
+
+## Removing the integration
+
+{% include integrations/remove_device_service.md %}
+
+Removing the integration stops all polling and closes connections to the devices. Your Kumo Cloud account and device settings are not affected.