diff --git a/src/docs/devices/flux-open-home/index.md b/src/docs/devices/flux-open-home/index.md
new file mode 100644
index 000000000..78e6e6943
--- /dev/null
+++ b/src/docs/devices/flux-open-home/index.md
@@ -0,0 +1,105 @@
+---
+title: Flux Open Home Night Light
+date-published: 2026-02-03
+type: light
+standard: global
+board: esp32
+difficulty: 1
+made-for-esphome: true
+project-url: https://github.com/FluxOpenHome/NightLight
+---
+
+## Description
+
+The Flux Night Light is an open-source, ESPHome-powered night light built on the ESP32-C3 with a 16-LED WS2812 addressable LED array arranged in a 4x4 grid. It integrates natively with Home Assistant for full color, brightness, and effect control.
+
+### Features
+
+- **16 Addressable LEDs**: WS2812 LEDs in a 4x4 snake-wired grid layout
+- **13 Built-in Effects**: Including Pulse, Rainbow, Fire simulation, Fireworks, Twinkle, and a custom Flux Logo animation
+- **State Persistence**: Color, brightness, and active effect are saved to flash and automatically restored after a power loss
+- **OTA Updates**: Firmware updates delivered over HTTP from GitHub releases with automatic detection in Home Assistant
+- **WiFi Provisioning**: Bluetooth LE (Improv), serial, or captive portal for initial setup
+- **Web Interface**: Built-in web server on port 80 for direct device control
+- **Dashboard Import**: Supports ESPHome dashboard adoption for easy onboarding
+- **WLED Compatible**: Can alternatively run WLED firmware by setting the data pin to GPIO10
+
+### Entities Created
+
+- **light.led_array** - Full RGB light control with color picker, brightness, and effect selection
+- **update.firmware_update** - OTA firmware update entity
+- **sensor.uptime** - Device uptime
+- **sensor.wifi_signal** - WiFi signal strength in dBm
+- **text_sensor.ip_address** - Device IP address
+- **text_sensor.connected_ssid** - Connected WiFi network
+- **text_sensor.esphome_version** - Running ESPHome version
+- **button.restart** - Device restart
+
+### Available Effects
+
+| Effect | Description |
+|--------|-------------|
+| Pulse | Smooth brightness pulsing between 20% and 100% |
+| Random | Transitions to random colors |
+| Strobe | Quick on/off cycling |
+| Flicker | Random brightness variations around the set color |
+| Addressable Rainbow | Moving rainbow across the LED strip |
+| Addressable Color Wipe | New colors introduced at the start of the strip |
+| Addressable Scan | Single dot sliding back and forth |
+| Addressable Twinkle | Random LEDs brighten momentarily like stars |
+| Addressable Random Twinkle | Twinkle with random colors |
+| Addressable Fireworks | Random sparkles that cascade and fade |
+| Addressable Flicker | Per-LED flicker around the active color |
+| Fire | Realistic flame simulation using a heat map |
+| Flux Logo | Animated Flux logo drawn on the 4x4 grid |
+
+## Hardware
+
+| Component | Specification |
+|-----------|--------------|
+| MCU | ESP32-C3 (esp32-c3-devkitm-1) |
+| LEDs | 16x WS2812 (GRB color order) |
+| Data Pin | GPIO10 |
+| Layout | 4x4 grid, snake wiring pattern |
+
+### LED Grid Layout
+
+```
+Row 4: LED 16  15  14  13   (right to left)
+Row 3: LED  9  10  11  12   (left to right)
+Row 2: LED  8   7   6   5   (right to left)
+Row 1: LED  1   2   3   4   (left to right)
+```
+
+## Setup
+
+1. Flash the device using ESPHome Dashboard or CLI
+2. Configure WiFi via:
+   - **BLE**: Improv via the ESPHome app or Home Assistant Companion
+   - **USB**: [web.esphome.io](https://web.esphome.io)
+   - **Captive Portal**: Connect to the fallback AP (password: `12345678`)
+3. Device auto-discovers in Home Assistant
+
+## Configuration
+
+The device configuration is available on [GitHub](https://github.com/FluxOpenHome/NightLight). It can be adopted directly via the ESPHome dashboard using the built-in `dashboard_import`.
+
+```yaml
+dashboard_import:
+  package_import_url: github://FluxOpenHome/NightLight/flux-night-light.yaml@main
+  import_full_config: true
+```
+
+## Alternative Firmware: WLED
+
+This device is also compatible with WLED. To use WLED instead of ESPHome:
+
+1. Flash WLED for ESP32-C3 via USB or [install.wled.me](https://install.wled.me)
+2. In the WLED web UI, go to **Config > LED Preferences**
+3. Set **GPIO** to **10**, **LED count** to **16**, **Color order** to **GRB**
+4. Save and reboot
+
+## Support
+
+- [GitHub Repository](https://github.com/FluxOpenHome/NightLight)
+- [GitHub Issues](https://github.com/FluxOpenHome/NightLight/issues)